2015-03-24 12.41.50

Anderson 3B Preparation Layer

Anderson 3B Flat Roofing Preparation Layer

The Anderson range of preparation layers are glass reinforced and coated with oxidised bitumen.

This is a range of products traditionally known as ‘BS747 felts’. BS 747 has now been withdrawn and replaced with BS 8747: 2007 – Reinforced bitumen membranes (RBM’s) for roofing – Guide to selection and specification.

Preparation Layers

  • Glass based
  • Available in standard or perforated

Glass fibre 20m roll RRP £28.50 + VAT – Our Price £14.50 +VAT

Anderson 3B

Anderson 3B

Durability:  Built up roofing correctly designed and installed incorporating Thermoglas 3B can have a life span in excess of 10 years.

We have a vast selection available.  Call now on 01704 233300 for details.

2015-03-24 12.38.58

Icopal Total Torch Vapour Control Layer

Icopal Total Torch Vapour Control Layer

Total Torch Vapour Control Layer is for use as a vapour control layer in bituminous, single-ply or liquid roof waterproofing systems. The torch-on membrane is used beneath insulation and safely controls the passage of internal water vapour through the roof structure. Since the membrane is adhered, it can provide a weatherproof temporary finish to the roof structure prior to the application of the final waterproofing system. It is suitable for use on both new and refurbishment projects.

Total Torch Vapour Control Layer is a SBS-modified bituminous membrane reinforced with an extra strong glass fibre fleece with a PET film. The upper surface is finished with specially formulated low melt bitumen stripes with a silica sand coating between and has a selvedge of 75 mm and is then finished with a thermofusible film. The lower surface is finished with a thermofusible film to prevent sticking in the roll.

Features & Benefits

  • Striped resinous profiles channel water vapour to help eliminate blistering, so prolonging roof life.
  • Bonding strength and lap security comparable to fully bonded membranes.
  • Low flame application.
  • Lower energy costs during application.
  • 8m x 1m

RRP £45.00+VAT
Our Price £20.00+VAT

Rolls are classed as slight seconds due to them being slightly over weight.

2015-03-24 12.38.58

2015-03-24 12.40.52

Slates – All Sizes – New and Reclaimed

Slates – All sizes in stock

We have a vast selection of quality roofing slates in stock ready for collection or delivery.

Call Brian on 01704 233300 for full stock details and prices.

 

All sizes in stock All sizes in stock

We also have a big selection of randoms, covering most large sizes.

Standard sizes in stock are:

  • 10″ x 12″ reclaimed
  • 18″ x 10″ reclaimed
  • 18″ x 12″ reclaimed
  • 20″ x 10″ reclaimed
  • 20″ x 12″ reclaimed
  • 22″ x 11″ reclaimed
  • 22″ x 12″ reclaimed
  • 24″ x 12″ reclaimed & new
  • 24″ x 14″ reclaimed
  • 24″ x 18″ reclaimed and new

We also have a large selection of new slates size 600mm x 300mm

3in1-2

Uniquely Patented Roof Tiles from Condron 3in1

Uniquely Patented Roof Tiles from Condron

Save on both materials and labour, as well as being a faster application

 

Size 265mm x 500mm
Pitch 30° minimum
Gauge maximum 100mm
Cover Width 500mm
Cover Capacity 100mm Gauge – 20 Tiles per m2
95mm Gauge – 22 Tiles per m2
90mm Gauge – 24 Tiles per m2
Surface Smooth
Weight (approx) per 1,000 tiles 3.75 tonnes
Batten size for rafters not exceeding 450mm c/c 44mm X 35mm
Batten size for rafters not exceeding 600mm c/c 44mm X 35mm
COLOURS AVAILABLE: Black, Grey, Brown, New Brown, Marigold, Terracotta, Brown Streaky, Red Streaky, Marigold Streaky, Terracotta Streaky and New Brown Streaky

ACCESSORIES AVAILABLE:

Eave Use Double Course at the Eave with
200mm. Eave/Top Tiles for the Undercourse
Verge Full Tile & Tile and a Half in alternate courses
Top Course Single Course with 200mm Eave/Top Tile
Hip Bonnet Hip Tiles
Ridge Universal Angle Ridge and High Pitch
Angle Ridge
Valley Valley Tile
Angles External 90°
Ornamental Feature Tile
Nails 40mm X 9 g A/Alloy
Bedding Material Coloured Pigments as required

NOTE: Reference should be made to ICP2.2002 for Slating and Tiling and any new Irish code of practices in the future. Condron Concrete Roof Tiles comply with I.S.3: 1972 “Concrete Roofing Tiles” & EN490.

3in1

Acrylic-Roof-Coat-Tin

Waterproof your roof quickly and easily – IKOpro

 

Waterproof your roof quickly and easily with IKOpro Acrylic Roof Coat – without removing existing waterproofing.

A liquid applied, solvent-based flexible acrylic roof waterproofing system, IKOpro Acrylic Roof Coat is designed to offer 10 years’ waterproofing protection to new or existing roof surfaces when reinforced with IKOpro GRF Glass Reinforcement Fleece.

As long as the roof deck is sound and defect-free, it can be applied on top of existing waterproofing including asphalt, bituminous felt and concrete, saving a great deal of time and effort.
Using IKOpro Acrylic Roof Coat is very simple too – but the right preparation is essential.
Step One:
Apply the Acrylic Roof Coat to the prepared surface by
roller or brush at a minimum coverage rate of 0.7 litre/m2

on smooth surfaces and 1.3 litre/m2 on rough surfaces.

Step Two:

Lay and overlap pieces of IKOpro GRF 100gsm mat
50mm at the side and end joints, into the wet coating
and apply pressure with a roller, making sure all the mat
is fully covered with no air holes. Allow to dry for at
least 6 to 8 hours.
Step Three:

Apply the final top coat of Acrylic Roof Coat by roller
or brush at a minimum coverage rate of 0.5 litre/m2
- and that’s it, you’re finished!
Acrylic-Roof-Coat-Tin
Torch-on

Icopal SBS Cap Sheet – Various Colours 8m x 1m

Icopal SBS Cap Sheet 8m x 1m

Colours available: Blue/Grey, Charcoal, Green & Brown

£20.00 + VAT

Slight Factory Seconds

High performance elastomeric SBS torch-on roofing membranes developed for use in high performance built-up systems on flat, pitched or curved roofs.

Icopal’s SBS torch-on capsheets also feature a unique patented mini groove profile that enables up to 30% faster application times and uses 25% less gas than traditional torch-on membranes.

Features & Benefits

  • 30% faster application than traditional torch-on membranes.
  • Technically advanced low heat-reactive bitumen.
  • Polyester reinforced.
  • Choice of colours.
Icopal SBS Cap Sheet
Icopal SBS Cap Sheet
Vent 3

Cromar Vent 3 Breathable Membrane Various Lengths

Cromar Vent 3® Breathable Membrane

A breathable roof underlay that gives major benefits over traditional underlays.

Cromar Vent 3® Classic breather felt is made from two high-tensile spun bonded polypropylene layers. This triple layer high performance breathable membrane is thermally calendared to a micro porous polypropylene film.

Exactly the same specifications as the Vent 3 Light breathable membrane but the Classic has a heavier GSM at 115, compared to the Light’s 95 GSM.

  • Three layer membrane
  • Clean and easy to use
  • Lightweight and flexible
  • Waterproof membrane
  • Long term durability
  • Warm and cold roof application

Application

Designed for use in a fully supported or unsupported tiled, slated or metal roof system.

Available in 50m2 and 75m2

Slight Factory Seconds
British Made

  • 50m2 roll only £11.00 + VAT
  • 75m2 roll only £15.00 + VAT
Cromar Vent 3 Breathable Membrane
Cromar Vent 3 Breathable Membrane

 

2015-01-22 12.06.20

Condron Bullnose Roofing Slate Tiles

Condron Flat Bullnose Roofing Tiles, available in both Grey & Black.

Only 50p per tile plus VAT

Approximately 10½ per square meter. This tile offers great value for money, superb strength and great aesthetics.

Limited Stock Available

Bull Nose  2015-01-22 12.06.20

 

Size 420mm x 330mm
Pitch 22½° minimum
Headlap 100mm
Gauge maximum 320mm
Cover Capacity 10½ tiles per metre squared
Surface Smooth
Weight (approx) per 1,000 tiles 5 tonnes
Batten size for rafters not exceeding 450mm c/c 44mm X 35mm
Batten size for rafters not exceeding 600mm c/c 44mm X 35mm
Colours Available: Grey, Black

ACCESSORIES AVAILABLE:

Eave Standard Tile
Ridge Universal Angle Ridge and High Pitch
Angle Ridge
Hip Universal Angle Ridge and High Pitch
Angle Ridge
Verge Full Tile, Half Tile, and Half Cloak Verge Tile Left and Right
Nails 50mm X 9g A/Alloy
Bedding Coloured Pigments as required

NOTE: Reference should be made to ICP. 1982 for Slating and Tiling and any new Irish code of practices in the future.  Condron Concrete Roof Tiles comply with I.S.3:1972 “Concrete Roofing Tiles” & EN490.