LRS-ONLY-Embed-and-outlined-sparks2
batten-comparison-chart
imgres

WT1 – Demo Day in Maghull

First of all, a huge thanks for all our customers that came to the demo day for launch of our latest stocked product WT1. It was a great morning with lots of question and answer sessions, and more importantly, lots of giveaways too, which is always a bonus.

John showed us all how versatile WT1 is, and the vast array of functions it has covering jobs like tanking, waterproofing, sealing and dealing with repairs that otherwise could be a lot of hard work, and we are sure that you will agree, this is a great product.

Click HERE for the product information sheet.

Click HERE for the safety data sheet.

For those who where not able to get to the Maghull site for the demo day, do not worry, as Southport will be having a demo day soon, and will send out invites again for the day. If you want to be added to our mailing list for demo days, product launches/news and flash sales, then click HERE, or using your smartphone, scan the QR code at the bottom of the post.

Below are some photos taken by Gareth on the day.

13590455_10153909314749825_9056245511055868551_n

13569003_10153909314744825_3590338521237515728_o

13559167_10153909314739825_1973864764684816929_o

 

Sign-Up Form

Power Grab’n’Bond

Our Latest Product

Power Grab’n’Bond adhesive is a super strong industrial adhesive born out of years of research into chemical bonding and compiled by C-Tec Building Product Specialists. C-Tec specialise in developing the extraordinary rather than the ordinary adhesives and this is evident when they developed and introduce into the market the CT1 unique adhesive and construction sealant which can bond in the wet even under water.

All colours and ancillary products held at both our depots.

Windows Slates APP Felt
Feb Offers
pipe2

Twinwall Plastic Pipes

We now stock a comprehensive range of Twinwall Plastic Pipes and accessories available at our Maghull Depot.

Quality products with low prices.

pipe

Advantages of using our Twinwall Plastic Pipes

  • Low weight 6m pipes with/without socket for safer and faster installation
  • High chemical resistance
  • High impact resistance which may permit faster backfilling (depending on ground condition)
  • Smooth interior, resulting with less blockages and greater flow rates
  • Permits easy cable installation
  • Slight curves can be fabricated to adapt to on site requirements
  • Joints are guaranteed to a 5m head of water
  • Made from recycled materials
  • High durability pipeline
  • Ring stiffness in excess of 6kn/m squared
  • Resistance to water jetting
  • Can be laid to a depth of up to 10m (depending on ground conditions)

The Twinwalled Plastic Pipes are compliant with EN 13476-3:2009 and have Irish Agrement Board Certification and  have just attained BBA accreditation.

 

pipe2

Pallet Quantity as Follows:

150 mm  –  36 per pallet
225 mm  –  14 per pallet
300 mm  –  8 per pallet
450 mm  –  4 per pallet

** 100 mm coming soon **

 

Prices each (exc VAT):

150 mm  x 6m (solid pipes)  –  £15.50
150 mm 30° Bends (solid pipes)  –  £9.50

225 mm  x 6m (solid pipes)  –  £28.50
225 mm 30° Bends (solid pipes)  –  £22.50

300 mm  x 6m (solid pipes)  –  £39.50
300 mm 30° Bends (solid pipes)  –  £37.50

450 mm  x 6m (solid pipes)  –  £132.50
450 mm 30° Bends (solid pipes)  –  £64.50

** 100 mm coming soon **

Full rises manhole covers and axillary products supplied POA.

 

** Coming Soon **

A unique customer driven software via the Condron website that can work out all drainage and surface water calculations.  3D printers are currently being installed for greater flexibility with all your future projects.

 

Installation Guide

General

The pipes are installed using traditional drain-laying methods in accordance with NRA specifications and in accordance with HSA requirements and the MCDRW, Volume 1, Clauses 503, 505, 518.7 518.8 and NRA HD 140/15. Due to the lightweight nature of the pipe material, handling and jointing are easily performed. Pipes are available with a fixed socket or a connection collar.

Before laying the pipes and fittings must be checked for damage that may have occurred in transit or storage prior to installation. Damaged pipes or fittings must not be installed. The laying should be commenced at the lower end of the pipeline run (from the outlet). The pipes are usually laid so that the sockets face to the top of the pipeline run. When 2 pipelines are laid side by side appropriate separation should be allowed to permit the appropriate compaction of the material between the 2 pipe runs.

Sealing rings are enclosed separately in order to avoid damages

Trench Preparation

Trenches should not be excavated too far in advance of pipe installation and should be supported by trench boxes where required by Health and Safety requirements.

Trenches should be as narrow as practicable, generally the pipe diameter + 300 and 600mm. Where multiple pipes are installed in a trench sufficient spacing should be allowed between them to ensure that there are no voids and the material can be fully compacted. Local soft spots in the trench base should be excavated and filled with a suitable compacted granular material.

The bedding material is laid below the Twinwall Road Drainage pipe to provide uniform support and to permit small adjustment of the pipe’s line and level. All bedding material is to be compliant with the engineers’ specification. No temporary supports (blocks of bricks, stones, wood, metal or other similar objects) should ever be used to prop the pipe during the installation process as it can damage the pipe integrity and cause pipe deformation.

Backfill

The embedment, the main backfill and the removing of the shoring should be carried out in order that the pipe connections and bedding are capable of bearings. The material for the bedding, the main backfilling and the covering shall meet the planning guidelines. Each covering has to be compacted either by hand or with a compacting plant. The covering above the soffit shall have a height of 300mm. For the main backfill the excavated material can be used, once the particle size is not larger than 300mm. For the main backfill equipment for mechanical compaction may be used. It is important to ensure that the main backfill is carried out in accordance with planning guidelines and NRA Manual of Contract Documents for Road Works (MCDRW).

Download our Structural Corrugated Twinwall brochure here

 

 

IMG_1361
2015-05-05 13.46.41

Redland Ridges

We have a vast selection of Redland Ridge Tiles available at all our depots.

Universal Angle Ridge Tiles

2015-05-05 13.46.41

Universal Angle Ridge Tiles are available in concrete in colours:

  • Slate Grey
  • Terracotta
  • Tudor Brown
  • Richmond Red
  • Richmond Brown
  • Black
  • Blue
  • Brecon Grey (Landmark finish)

Universal Angle Ridge Tiles can be dry fixed, mortar bedded only or mortar bedded and mechanically fixed. When ridges are mortar bedded & mechanically fixed, use clamping plates and woodscrews, complete with neoprene washers and foam grommets. A 6 mm diameter hole should be carefully drilled centrally in each ridge tile.

Hi Pitch Universal Angle Ridge Tiles are available for use on steep roof pitches. They are available in colours Slate Grey, Terracotta and Tudor Brown. Hi Pitch Universal Angle Ridge Tiles can be either mortar bedded only or mortar bedded and mechanically fixed.

A Block End Ridge Tile must be used at the verge when using the Ambi-Dry Verge System.

 

Half Round Ridge Tiles

2015-05-05 13.45.43

Half Round Ridge Tiles are available in concrete in the following colours:

  • Brown
  • Antique Red
  • Cotswold
  • Natural Red
  • Slate Grey
  • Terracotta
  • Tudor Brown
  • Rustic Brown
  • Terracotta Brindle (Landmark finish)
  • Brown Brindle (Landmark finish)
  • Blue
  • Black
  • Charcoal Grey
  • Rustic Red
  • All Heathland and Rosemary Clay colours are also available

They can be dry fixed, mortar bedded only or mortar bedded and mechanically fixed. When ridge tiles are mortar bedded & mechanically fixed, use Clamping Plates and woodscrews, complete with neoprene washers and foam grommets. A 6 mm diameter hole should be carefully drilled centrally in each ridge tile.

A Block End Half Round Ridge Tile must used at the verge when using the Cloaked Verge or Ambi-Dry Verge System.

Capped Half Round Ridge Tiles are available for use with Cathedral Clay Pantiles and Old Hollow Clay Pantiles in Vintage Blue, Vintage Red, Terracotta and Brindle.

If Rapid Vented Ridge is required when using Cathedral, use Rich Terracotta Half Round Ridge Tiles with Cathedral Terracotta and Terracotta Brindle Ridge Tiles with Cathedral Brindle.

When using Old Hollow, Cathedral, Regent, Grovebury, Norfolk Pantile or Landmark Double Pantile with mortar bedded ridge tiles, bed Dentil Slips in the pans of the tiles.

 

Block End Ridge Tiles

2015-05-05 13.41.42

Redland