Waterproof your roof quickly and easily with IKOpro Acrylic Roof Coat – without removing existing waterproofing.
A liquid applied, solvent-based flexible acrylic roof waterproofing system, IKOpro Acrylic Roof Coat is designed to offer 10 years’ waterproofing protection to new or existing roof surfaces when reinforced with IKOpro GRF Glass Reinforcement Fleece.
As long as the roof deck is sound and defect-free, it can be applied on top of existing waterproofing including asphalt, bituminous felt and concrete, saving a great deal of time and effort.
Using IKOpro Acrylic Roof Coat is very simple too – but the right preparation is essential.
Apply the Acrylic Roof Coat to the prepared surface by
roller or brush at a minimum coverage rate of 0.7 litre/m2
on smooth surfaces and 1.3 litre/m2 on rough surfaces.
Lay and overlap pieces of IKOpro GRF 100gsm mat
50mm at the side and end joints, into the wet coating
and apply pressure with a roller, making sure all the mat
is fully covered with no air holes. Allow to dry for at
least 6 to 8 hours.
Apply the final top coat of Acrylic Roof Coat by roller
or brush at a minimum coverage rate of 0.5 litre/m2
- and that’s it, you’re finished!